A multiobjective land development optimization model: the case of New Castle County,Delaware

This paper develops a multiobjective optimization model to consider transportation impacts of the future development of land. The output of the model is the best location and type of land use that has minimal negative transportation effects and uses the maximum available public transportation infrastructure. It provides tools for both planners and transportation engineers and enables them to consider different scenarios of possible policies and land development. Since multiple objectives and their nonlinear structures are considered, the model is solved using mixed integer nonlinear programming. The final results are shown in both tabular and graphical format. The effectiveness of the model is applied to the northern part of New Castle County, Delaware. The results show that the model successfully finds the best locations for both residential and commercial land uses in order to meet several criteria discussed in the paper.     

A modified reinforcement learning algorithm for solving coordinated signalized networks

This study proposes Reinforcement Learning (RL) based algorithm for finding optimum signal timings in Coordinated Signalized Networks (CSN) for fixed set of link flows. For this purpose, MOdified REinforcement Learning algorithm with TRANSYT-7F (MORELTRANS) model is proposed by way of combining RL algorithm and TRANSYT-7F. The modified RL differs from other RL algorithms since it takes advantage of the best solution obtained from the previous learning episode by generating a sub-environment at each learning episode as the same size of original environment. On the other hand, TRANSYT-7F traffic model is used in order to determine network performance index, namely disutility index. Numerical application is conducted on medium sized coordinated signalized road network. Results indicated that the MORELTRANS produced slightly better results than the GA in signal timing optimization in terms of objective function value while it outperformed than the HC. In order to show the capability of the proposed model for heavy demand condition, two cases in which link flows are increased by 20% and 50% with respect to the base case are considered. It is found that the MORELTRANS is able to reach good solutions for signal timing optimization even if demand became increased.     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

Multi-objective optimization for asphalt pavement maintenance plans at project level: Integrating performance,cost and environment

Traditionally, asphalt pavement maintenance mainly considers pavement performance and cost and largely ignores the environment while substantial amount of environmental burdens are released in the process. In this study, a multi-objective optimization model was developed integrating the three elements in order to optimize the asphalt pavement maintenance plans at the project level. Pavement performance element was decided as the multiplier of pavement serviceability index and traffic volume. Cost element was represented by the net present value, including components of agency cost, vehicle operation cost and salvage value. Environmental element, integrating energy consumption, global warming potential, acidification potential and respiratory effects potential, was measured by the life cycle assessment model. A hypothetic asphalt pavement maintenance case study was conducted using the developed multi-objective optimization model and harvested 103 sets of feasible combinations of maintenance plans, each of which is non-dominated by the others. Trade-offs analysis was performed among the three objectives and visualized in both two- and three-dimension forms. It is found there is an opportunity of reducing the cost and environmental impacts to 80.3% and 77.8% and increasing the pavement performance to 146.6% compared to the base case. However, they are mutually compromised and cannot be reached simultaneously. The developed model reveals the quantitatively interactive relationship of the three objectives and helps optimize the asphalt pavement maintenance plans.     

基于OpenStreetMap的城市自行车网建模与多判据路径规划

自行车交通是一种健康、绿色、环保的交通出行方式,合理地规划自行车出行路线对于满足骑行者多元化出行需求、构建安全规范的城市交通出行环境具有重要的意义.在对真实骑行者路径选择行为深入分析的基础上,提出了基于Open Street Map的城市自行车网络的构建方法及基于其上的多判据自行车路径优化的数学模型,并给出了求解该模型的一种基于聚类的最优多判据路径规划方法.实验仿真结果表明,该模型及方法能够生成满足骑行者真实需求的多判据路线方案.     

基于蚁群算法和群决策理论的动态路径优化研究

文章针对城市交通信号控制中的动态路径优化问题,综合考虑相邻交叉口间距和路段交通饱和度两个参数的影响,提出了一种基于蚁群算法和群决策理论的动态路径优化算法模型,并通过仿真实验,对比分析了该算法模型的有效性。     

基于最优回归理论的舰船辐射噪声指向性统计模型及分析方法研究

文章在已有单航次的舰船噪声空间特性建模分析方法等研究成果的基础上,进一步研究了若干航次条件下的统计建模及分析方法。该研究主要以单一部位垂向剖面的噪声指向性为例,建立了基于最优回归理论的舰船目标辐射噪声特性的统计模型及分析方法,并开展了海上实测研究,验证了该模型及分析方法的正确性和可行性。该项成果为深入分析不同航行工况下各类舰船目标的噪声空间特性及其统计规律等创造了条件。     

减摇复合船型首部构型设计与水池模型试验研究

船舶在波浪中航行时的纵向运动性能是衡量船舶综合航行性能的重要指标.为了改善船舶在波浪中的纵向运动性能,本文基于首部减摇组合附体技术对某型船首部构型进行改造并通过水池模型试验对其静水阻力和耐波性进行了分析研究.在分析该船作业及航区特点的基础上,通过船首部线型改造及减纵摇组合附体构型优化,给出适用于该船的首部构型方案.应用CFD软件和修正切片法进行水动力性能分析,并对船首构型方案进行优选.将优选出的性能较优复合船型方案和原船型开展水池模型静水阻力与耐波性对比试验分析,验证减摇复合船型的静水阻力性能与耐波性能.试验结果表明,改造后的复合船型减纵摇效果明显,对应实船四级海况18节航速下纵摇与首部加速度有义值较原船型降低15%以上;复合船型静水阻力有所增加,实船18节航速下静水阻力增加13.5%.     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.